Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - kamelkamel

Pages: [1] 2
Professional Services / Re: FengOffice in HTML5 or something else?
« on: January 14, 2020, 04:36:34 PM »
i have installed FengOffice in our bussiness and we pretty like it, but obviosly it works with Flash, which will be no longer supported in the foreseeable future e.g. in Mozilla Firefox.
 pornjk porn800 redtube

Feng Office 2 / Re: PRINT PROBLEM
« on: August 06, 2019, 12:47:19 PM »
I have found the same problem when the report I wish to print has a built-in filter in my case an ask variable filter in the report.  I confirmed that my process is OK by printing a report without a ip birthday wishes tneb  I dont know what to do to get my filtered report working.

When i try print task description is OK, but when i try print notes from work about task, i see wrong data.

Feng Office 2 / Re: No permission after installation and resta
« on: August 06, 2019, 12:45:53 PM »
omg - if this is true, they didnt get a fair trial and something should be done about itmy ip birthday wishes tneb

misssing lang.js: information: Sie haben keine Berechtigung, die angeforderte Seite aufzurufen.

I am having the same issue on one of my installations. I've spent all day trying to figure it out, and can't get it to work. :(

Did you find anything to get it fixed?auto clicker word unscrambler jumble solver

I am having the same issue on one of my installations. I've spent all day trying to figure it out, and can't get it to work. :(

Feng Office 3 / Re: Fengoffice clean installation error
« on: July 27, 2019, 11:11:54 AM »
Good day

I have updated my Feng Office install to the latest version running on PHP 7.2. Check if this resolves your issue. My issue  , when I try to retrieve emails (Check Email) it returns a blank screen, remains unresolved. auto clicker word unscrambler


According to the issue (As of February 3, 2019), it looks like PHP 7.1 will work, but 7.0 and 7.2 are having issues.

Feng Office 3 / Re: Cannot create new users!!
« on: July 19, 2019, 02:30:31 PM »
What is your version of:
  • Server
  • PHP
  • Database
  • etc...

Make sure they line up with the requirements listed here:
my ip birthday wishes tneb

Also make sure you have all php modules and other software listed installed on the server.

Without further info, this is where I would start troubleshooting.
Hope it helps!

Hi. I just installed the latest version, but when I try creating a new user I get a web page with the following message:

Feng Office 3 / Re: compatibility with PHP 7.2?
« on: July 19, 2019, 02:29:35 PM »
No, not yet, and I won't have time in the next 2-3 weeks.
I'll keep you updated!

I have struggled with this issue for some time. I stand corrected, but the latest community edition of Feng Office, is NOT compatible with PHP 7 and above.

General Discussion / Re: Problem saving in jEdit
« on: July 10, 2019, 04:14:47 PM »
Yes facing same issue here..Tried searching on different sources but unfortunately couldn't find any solution. brazzers pornhub xhamster

I have tried saving under other names, and I get the same error. I am on windows 10, and using jEdit 5.5. I would appreciate some help!

Government / Re: Government
« on: July 03, 2019, 10:20:40 PM »
Thank you for the very detailed explanation. Feng is a good community, I appreciate it very much except logging in is a bit problematic. But for me, that's fine, I like it

Further  complete document management system is needed. At present it has limited ability. I liked the creation of notes and power point presentation. .

How To's / Re: Feng 3.4.x sub version
« on: June 29, 2019, 11:37:31 AM »
Hi Natalia - thank you for the update.
my ip birthday wishes tneb
There is a significant issue with the current version that was fixed in (not available on Sourceforge) where emails with no message id are not imported via imap.

Would really appreciate that this update is published on Sourceforge.

Would FO consider making the sub-version changes available on Sourceforge? Sourceforge last version is 3.4.3, but there have been 20

How To's / Re: problems creating data archives
« on: June 29, 2019, 11:36:06 AM »
Hello everybody.
i try to add some function in fengoffice, and i  brazzers pornhub xhamsterwant update/delete/create new tasks in independent layer and i know how to add all data(start_date, end_date, description, etc.) to database. but i want online internet updating (same as creating or editing task from task-tab) content then i switch my layer to classic task layer and back.
I really can't see any JSON or some else store.

Problems and suggested solutions in creating an archive of clinical trials data to permit later meta-analysis: an example of methotrexate trials in rheumatoid

Hi elastigirl!
Were you able to determine if this configuration is possible??

Is the following config possible anyway by utilizing workspaces and permissions.. or will I need to install multiple copies one for each sub company and will that cause problems if they are all on the one host?

Can someone help me with this issue and provide an answer as well. Sorry I'm a rookie at fengBrazzers Youporn Xhamster

How can I get notification email when someone adds worked hours?

Is this a  part of the feature? If so, how?

Will the community edition ever have the Projects Dimension or the ability to add your own? Youjizz Pornhub Tubegalore

Im the only FO user of my installation, so I dont know how others would use this.
I use dimensions for some sort of categories of my tasks.
As far as I know, there are no "Projects" in FO. Just Dimensions, Tasks and Tags.

Ideas / Re: Lock parts of a document when editing collaboratively
« on: June 19, 2019, 11:14:20 PM »
@Conrado for a long time my forum password was unable to be reset. I could not use the reset password function because it did not email me, but Natalia fixed it for me. At least now I can log back in!

You can check in your files before editing them and you can set up the system to automatically check them in when in edition. This way the whole document is protected for another member edition.

Pages: [1] 2